Do you ever experience the occasional dropping of Wifi network or unreliable connection to your devices? If you are using your Google Wifi for the Mesh network, you may experience this at least a few times. There is a community thread from Google Wifi users complaining about the random Wifi dropping. If you are also stuck with the same problem, we have found the solution for you.
In this guide, we included all possible solutions to fix Google Wifi keeps disconnecting issue. If one does not work for you, keep reading and try further methods. Let’s begin.
Restart Your Google Wifi Router and Points
The classic troubleshooting of electronic devices by power recycling them can be helpful if you are stuck with a Google Wifi that keeps disconnecting the WiFi network. As the first step, turn off the power for the main router and all the WiFi points in your Mesh network. Make sure you wait at least 10 seconds before turning the power back on to ensure proper power recycling.
If it was simply a software glitch with the Google Wifi mesh routers, it should now work properly without any issues. In case you are still facing the WiFi disconnecting issues, keep reading through more troubleshooting methods.
Check Your Google Wifi Firmware Version
Google Wifi router, like your phone or computer, runs on its own firmware. To improve the performance and strengthen the WiFi security, Google pushes occasional firmware updates. These can go wrong at times and can cause Google Wifi to act like this again. You can check the firmware version of your Google Wifi router and use it to see if you are facing a common problem.
To check the firmware version of your Google Wifi mesh router, open the Google Home app and select the Google Wifi device. From there, tap the Settings option at the top and choose “Device Information” from the settings.
Once you are there, note down the firmware version and look for any similar issues with the same firmware version by searching Google or in forums.
In case you are facing a common problem that everybody has due to the firmware update, you need to wait until Google pushes a patch for it. There is no way you can manually update or roll back the firmware version on Google Wifi mesh routers.
Use Custom DNS in Google Wifi
DNS resolves your web request and lets you visit websites, and browse through apps over the internet quickly. By default, all of our devices and routers use the ISP’s DNS or Domain Name Servers. They are most likely to fail or slow down your internet. To solve this issue, it is always better to set your default DNS as any public DNS service like Google DN or Cloudflare DNS.
To change the DNS of your Google Wifi router, follow the steps below.
- Open the Google Home app on your phone and select the Google Wifi router from the home page.
- Tap the Settings icon at the top.
- Select Advanced Networking from the settings menu.
- Tap on DNS from the next screen.
- Choose any DNS from the options and then tap Save.
For a better internet speed, you can choose Google DNS or Cloudflare DNS for your Google Wifi. Once you change the DNS settings on your Google Wifi router, restart, and try if the internet connectivity issue is resolved.
Use Ethernet Connection for Your PCs
Are you facing Wifi disconnecting issues on Google Wifi when you have too many devices connected? It is probably because the WiFi has limitations to hold that much of devices online at a time. As a workaround, you can try connecting your computer and similar devices using an ethernet cable instead of using WiFi. That way, you can save a few slots for other connected devices in the WiFi bandwidth.
This method can also be a lifesaver when you want to work on your PC but the WiFi connected without any internet. You simply need to extend an ethernet cable from the Google Wifi point to your computer to go online in a jiffy.
Check How Many Wifi Points You Have
If you are trying to use the Google Wifi routers in a huge building, or over multiple floors by adding multiple Google Wifi points, you may have to check the number of points you are trying to connect.
Google Wifi officially supports up to 4 additional Wifi points connected to the main router. All the routers collectively can cover up to a maximum of 6000 sq. ft. of area. If you are trying to extend this coverage even more by buying more Google Wifi points, these additional ones will keep disconnecting the WiFi and will cause the issues.
In case you did something like this on your home WiFi, remove any additional points and retry connecting to the WiFi.
Related: 8 Best WiFi 6 Mesh Routers to Speed Up Your Home WiFi
Factory Reset the Google Wifi Mesh Routers
Assuming none of the above-mentioned troubleshooting methods worked for you, as a final resort, you can try resetting the Google Wifi routers to the factory settings. It is not that hard to factory reset your Google Wifi mesh routers from your phone. Let’s see how to do that.
- Open the Google Home app on your phone and tap the WiFi option from the home screen.
- Select the Settings option from the top.
- Choose “Factory Reset Network” from the screen to hard reset your Google Wifi router and WiFi points.
- Select OK from the next screen to begin reset.
Related: Google Wifi vs. Nest Wifi: Which Mesh WiFi Router Suits Your Home
Replace Main Router with Nest Wifi
Each Google Wifi point can act as a router as well as a point connected to the main router. They all have the same design and same coverage. If you have already invested in a couple of Google Wifi routers and are facing the WiFi disconnecting issue, replacing the main router might get your issue resolved.
Since the Google WiFi is backward compatible with the new Nest Wifi routers, all you have to do is to get one Nest Wifi router for your network. Then you can reset your existing Google Wifi network and set up the new Nest Wifi router as the main router. From there, you can pair and use all your Google Wifi points to expand the mesh network. Check out our complete guide to upgrading Google Wifi to Nest Wifi router for detailed information.
- Maximum Range : 2200 Sq Ft
Once you finish going through all the troubleshooting methods, your Google Wifi network will resolve the connection dropping issue. If none of the workarounds help, replacing the main router with the Nest Wifi router is definitely going to help you. If it does not, let us know in the comments below.
Well, my enthusiasm for all things Google has finally turned on me. Now that I’m helplessly hoping for a push firmware update to my Google mesh router, they benefit by charging me more for using their Google Fi cellular data every time my router goes offline. grrrrrrr.
For the last 6 days, since 2022-04-20, my Google Wifi (firmware 14150.43.80) keeps clogging up and bring speeds crossing the Google Wifi router (wireless and wired sections) to a fraction, at times <10% of its normal throughput. Ping and DNS lookup (from the Google Wifi LAN side to the Google Wifi “WAN” Side (all still internal network in my setup) experince massive delays (>100 msec instead of <4ms for a DNS query). At the same time network is severely limited in my Google Wifi LAN network, I measure normal performance to my ISP in the network parts “outside” my Google Wifi.
Resetting the Google Wifi solves the problem for a random number of hours. The problem is also intermittent and sometimes seems to fix itself.
Anybody else having problems with this firmware version? Any tips?
Mine started dropping connections around the beginning of the year. Did all of these things, including having the ISP send someone in to test everything. They made good on their end (surprisingly) and even gave me a brand new router – which hasn’t had a single drop in connection since being plugged in. The Google Wifi eventually stopped dropping connection on it’s own for a month and a half and now it’s doing it a gain. It’s *definitely* Google’s firmware and they just don’t give a $#@!. That and the quality of Google Home Hub Max’s quality and performance has also diminished over the last 2 years. Like a previous comment said, faith in Google is greatly diminished.
It seems to cycle… sometimes it will go for months without much pain, then it will fail again, and require 5 or more reboots in a day. I wish I never invested in google wifi. Silly me thought I’d upgrade to google nest wifi to “fix” it only to have the same issues. Customer loyalty is a waste of money. Having to do anything from your phone is a joke too when wifi isn’t working. When things play up, I try to connect to google home app wifi network settings ready to restart entire network – oops, can’t connect. Sometimes power cycle all points (5 in total) clears them well enough to last a while. Chat/email to google techs and they eventually give up and stop responding. Whenever they feel like updating firmware they do. Suddenly things start breaking again and you can’t do a thing about it until they decide to fix their sh*t.